081362449440 Jual Portable Digital Conductivity Meter K11420 , Conductivity Meter Koehler K11420 Distributor Koehler Instrument Indonesia , Koehler Instrument Jakarta Indonesia.

BINTANG INSTRUMENT
HP : 081362449440 , 081310157965
Email : b081362449440@yahoo.com
Up. Mr Jonathan  
============================
============================
============================

Portable Digital Conductivity Meter 

Type : K11420

Brand : Koehler Instrument

Specification :

Conforms to the specifications of: 

ASTM D2624

Range: 0 – 2000 pS/m

Resolution: ±1 (0 – 2k pS/m)

Accuracy: 2% of Reading

Controls: 1 Pushbutton, dual function

Display: Liquid Crystal, 5 Digits

Ground: Banana jack on electronics assembly

Power: Temperature Range: 32° to 165°F (0° to 75°C)

Carrying Case: Hard, solvent resistant, molded plastic

Dimension :

lxwxd,in.(cm): 7.5x2.25x1.7 (19.05x5.72x4.32)
Probe Dia: 0.75 in. (1.91cm)
Net Weight: 8.2 oz (232.5g)

Accessories :

• K11420-1 CU Calibration Box Set (Low 10pS/m) 
• K11420-2 50ft. Cable Assembly 
• K11420-3 100ft. Cable Assembly 
• K11420-5 CU Calibration Box Set (High 10pS/cm)

Description :

The portable digital conductivity meter provides a measurement of electrical conductivity of fluids in conductivity units (CU), which are defined as picosiemens per meter in ASTM D2624. The rugged electro/mechanical design facilitates ease of use for both laboratory and field applications. The meter was designed and developed for safety reasons to measure the electrical conductivity of hydrocarbon fuels, particularly jet fuels. Additional pre-amp versions are available to accommodate measurement of a variety of fluids for different applications. The portable digital conductivity meter consists of an electronics assembly and a stainless steel probe. The probe, which is similar to a capacitor having concentric electrodes, is immersed into the fluid, up to the set of holes. During the read cycle a relatively small direct current flows through the fluid between the electrodes. The current is amplified in the electronics assembly and is displayed on the liquid crystal display in picosiemens per meter (pS/m). This data is then stored in non-volatile memory and can be retrieved until the next read.

Features  :

• Continuous standard electrical conductivity range from 0 to 2000 picosiemen per meter (pS/m)
• Available in other conductivity ranges
• LED illuminates during automatic test cycle (3 seconds)
• Temperature measured and displayed in Celsius and Fahrenheit
• Data stored (non volatile) until next test cycle is performed
• Hermetically sealed
• Text presentation of operational status
• Automatic over range and low battery indications
• Single push button operation
• Digital, liquid crystal display
• Powered by 3 standard lithium cells
• Listed by UL and LCIE as Intrinsically Safe

.

.

.

..