BINTANG INSTRUMENT
HP : 081362449440 , 081310157965
Email : b081362449440@yahoo.com
Up. Mr Jonathan
============================
Portable Particle Monitor
Type : icountLaserCM30
Brand : Parker
Tech Specifications:
• Performance Characteristics
- Maximum Operating Pressure - 2.5 bar when using Case Mounted Pump; up to 420 bar when CMP not used
- Environmental Temperature +5°C to +40°C (+41°F to +104°F)
- Fluid Temperature +5°C to +80°C (+41°F to +176°F)
- Cycle Time < 90 seconds in both single and multi-test mode.
• Materials of Construction
- Outer Moulding - Structural foam ABS / Coating: Polyurethane
- Wetted Flow Path - Nylon with Kevlar Reinforcement Microbore Hose /
Brass / Viton / Polyacetal (Delrin) / Zinc Plated Mild Steel / Stainless
Steel 302, 303 and 316 / Soda-lime Glass
• Fluid Compatibility
- Mineral oils and petroleum-based fluids
Features & Benefits:
• Special ‘diagnostics’ are incorporated into the icountLaserCM microprocessor control to ensure effective testing.
• Routine contamination monitoring of oil systems with icountLaserCM saves time and saves money.
• Contamination monitoring is now possible during application operation - icountLaserCM saves on production downtime.
• Data entry allows individual equipment test log details to be recorded.
• Data retrieval of test results from memory via hand set display.
• Automatic test cycle logging of up to 99 tests can be selected via hand set display.
• Totally portable, can be used as easily in the field as in the laboratory.
• Automatic calibration reminder.
• Instant, reproducible results achieved with a test cycle in under 90 seconds.
• Auto-testing allows for the conducting of automatic sequencing tests on flushing systems for example.
• Worldwide service and technical support.
• Re-calibration - Annual certification by an approved Parker Service Centre.
Markets:
• Agriculture
• Construction
• Oil and Gas
• Power Generation
• Marine
• Mining
• Forestry
• Industrial Plant
• Aviation
Applications:
• Airplanes
• Forwarders
• Excavators
• Harvesters
• Power packs
• Waste balers
• Reach stackers
• Wheeled loaders
• Hydraulic presses
• Drilling equipment
• Marine steering units
• Industrial power units
• Deck and mobile cranes
• Municipal service equipment
081362449440 Jual
Laser CM Parker , Portable Particle Counter , 081362449440 Jual Laser
LCM20 Parker , Portable Particle Counter LCM20 , Jual icountLaserCM30 -
Portable Particle Monitor , jual Inline Particle Monitor – iCountPD
The Parker iCountPD is a highly compact, permanently mounted laser
detection particle monitor that enables continuous monitoring of
contamination levels in hydraulic and fluid circuits. Capable of
communicating results in ISO4406 / AS4059 or NAS1638. 59 Parts Portable
Particle Monitor – iCountOS The iCountOS is a highly rugged portable
particle monitor that can be used for measuring contamination levels in
fuels and/or hydraulic fluids. Capable of operation online (direct
connection to system) or offline (sampling from tank or reservoir). 7
Parts Portable Ash Instrument Analyser - Ash Probe Series The Ash Probe
is a hand portable instrument for measuring the ash content of piles,
wagons or trucks of coal. It provides the user with quick and accurate
ash readings within seconds. 48 Parts Portable Particle Monitor –
iCount LaserCM The iCount LaserCM is a portable particle monitor that
enables field personnel to quickly and easily measure contamination
levels in oil and hydraulic fluids. Notable features include ISO/NAS
cleanliness reporting, data graphing, and a built-in printer. 12 Parts
Ferrous Wear Meter - Parker Kittiwake Parker Kittiwakes Ferrous Wear
Meter (FWM) detects metal particles in an oil samples taken from
lubricated machinery. 1 Part High Pressure Mechanical Flowmeter –
Flowline The Flowline Series comprises a range of highly rugged inline
mechanical flowmeters that provide visual indication of fluid flow in
hydraulic systems. Capable of measuring flows ranging from 1 – 360
L/min. Maximum allowable working pressure: 350 bar. 40 Parts Low
Pressure Mechanical Flowmeter – Easiflow The Easiflow line comprises a
range of highly economical, inline mechanical flowmeters that provide
visual indication of fluid flow in hydraulic systems. Capable of
measuring flows ranging from 1 – 150 L/min. Maximum allowable working
pressure: 10 bar. 20 Parts ANALEX_PQL -Ferrous Debris Monitor The
ANALEXpql is developed to replace the widely used pqM and pqA. Using all
new hardware, software and the latest technology, the highly accurateis
an essential addition to the modern used oil analysis laboratory. 1
Part XRF Analyser The XRF analyser offers the ability to spot check the
Sulphur content of fuel oil onboard a ship. The XRF will help
shipowners and operators ensure compliance with the latest International
Maritime Organization (IMO) regulations. 1 Part Fuel Drip Bunker
Samplers Parker Kittiwakes bunker samplers are designed to provide a
representative sample of the entire fuel delivery. Manufactured from
stainless steel. 12 Parts IcountBS Plus - Bottle Sampler The
revolutionary icountBS is an advanced, fully contained bottle sampling
system that ensures fast, accurate and repeatable detection of
contamination in hydraulic oils and hydrocarbon fuels. 2 Parts
IcountACM - Aviation fuel contamination monitoring Development work
carried out by the CMC engineers, in conjunction with Aviation,
highlighted the need for an alternative test method to determine the
levels of dispersed contamination in Jet fuel. 7 Parts icountLaserCM30 -
Portable Particle Monitor The Parker icountLCM30 is a next generation
fluid system contamination monitoring offering an under 90 second test
procedure. 1 Part Portable Heated Viscometer The Parker Kittiwake
Heated Viscometer is a highly rugged and easy-to-use diagnostic device
that provides accurate oil viscosity results in minutes for fast onsite
maintenance decisions. Supplied in a compact case for maximum
portability. 1 Part Inline Sensors & Monitors for emulsion oils -
System 20 System 20 monitors, combined with the inline sensor, give the
user accurate and instant readings of oil or water low, pressure and
temperature without the need to shut down the system. Where To Buy 0
Part Hand-held Oil Condition Monitor – Oilcheck Parker’s Oilcheck is a
completely portable, battery-powered condition monitoring device that
provides visual indication of oil quality by measuring and comparing the
dielectric constant of new and used fluids. Battery life: >150 hours
or 3000 tests. 1 Part Power Plant Lab - Parker Kittiwake Parker
Kittiwakes Power Plant Lab is aimed specifically at diesel power plant
installations in remote and often inhospitable locations 2 Parts Fluid
Moisture Sensor – iCountMS Range The iCountMS Range is an inline
moisture sensor that allows for continuous monitoring of relative
humidity (moisture content) in hydraulic and lubricating fluid circuits.
Three models available with maximum allowable working pressures up to
420 bar. 21 Parts IcountBSwg - Bottle Sampler for Water Glycols The
icountBSwg plus provides on-the-spot analysis, allowing personnel to
make confident, informed maintenance decisions without needing to wait
for a laboratory service. 2 Parts DIGI Field Test Kit - Water in Oil,
TBN, TAN, Insolubles and Viscosity Comparison The DIGI Field Kit from
Parker Kittiwake comes complete with tests for Water in Oil, Total Base
Number, Total Acid Number, Insolubles and Viscosity Comparison. This kit
provides the ability to test on-site, resulting in convenient routine
oil analysis. 1 Part Fuel and Lube Cabinet - Parker Kittiwake Parker
Kittiwakes Fuel and Lube lab gives the ability to test oil and fuel
on-site, at the point of use, enables ships crew to conduct oil and
bunker fuel testing quickly and easily. 1 Part MWDS - Metal Wear Debris
Sensor The Parker Kittiwake Metallic Wear Debris Sensor goes beyond
the scope of normal wear debris sensors to offer even smaller size
resolution. With an unbeatable detection range, the sensor provides a
debris count for both ferrous and non-ferrous metals. 2 Parts MHC-MEMO
PRO - on-site Acoustic Emissions instrument MHC-Memo Pro - the ultimate
tool for condition monitoring, Full spectrum capture and analysis
capability with the included software. Route logging facility for
multiple plant routes. 1 Part Dataflow - Flow Transmitters Parker HFDE
has an extensive range of flow metering products. Dataflow 4-20mA and
pulse output flow transmitters and the Dataflow Compact inline flow
transmitter. 3 Parts Portable Contamination Analyser - Gamma Eye Series
The Parker portable contamination analyser - Gamma Eye offers superior
performance for sites where significant quantities of gamma
contaminated material need to be assayed and segregated within a short
time frame. Oil Test Kit (Digital) – DIGI Test Cell The DIGI Test
Cell from Parker Kittiwake is a compact, onboard oil test kit ideally
suited for use in marine applications. Capable of testing for water in
oil, total base number (TBN), total acid number (TAN), insolubles, and
comparative viscosity. 1 Part Low Pressure Mechanical Flowmeters –
Loflow Series The Loflow Series comprises a range of inline mechanical
flowmeters that provide visual indication of fluid flow in hydraulic
systems. Capable of measuring flows ranging from 0.01 – 22 L/min.
Maximum allowable working pressure: 10 bar. 7 Parts Cold Corrosion Test
kit - Parker Kittiwake Parker Kittiwakes patent Cold Corrosion Test
Kit is a quick, simple to use chemical test that provides an accurate
measure of the parts per million (PPM) value of Fe2+ and Fe3+ compounds
in used scrape down oil. 1 Part DIGI Base Number Test kit - Parker
Kittiwake Parker Kittiwake's oil test kit range provides a complete set
of economically priced equipment, with a level of accuracy suited to
routine analysis. 1 Part Acoustic Bearing Checker– Machinery Health
Check (MHC) Parker Kittiwake's MHC Bearing Checker is an innovative
hand-held device that provides engineers with the capability to quickly
and accurately analyze bearing condition and lubrication state. Allows
for up to 1000 measurements between charges. 1 Part FPS - Fluid
Property Sensor Modern mobile equipment calls for a hydraulic fluid
ensuring profitable and reliable operation. 1 Part MHC-Classic Plus If
you like the simplicity of the MHC-Classic but in addition to Standard
mode you need Super-Slo mode, then the MHC-Classic Plus is simplicity
itself. 32 measurement point non-volatile memory. 1 Part ANALEX_RPD
-Rotary Particle Depositor The ANALEXrpd Particle Depositor offers a
rapid and simple method of debris separation. 1 Part Conveyor Belt Ash
& CV Instrument Analyser - Heat Eye Series The Parker Heat Eye is
an on-line instrument providing second-by-second measurement of the Ash,
Moisture and Nett Calorific Value (Nett CV) ie the energy content of
conveyed coal. 1 Part LinerSCAN - Cylinder Liner Monitor Parker
Kittiwakes LinerScan system is designed to remove the uncertainty of
cylinder damage resulting from low fuel quality, slow steaming, low
sulphur levels, lower oil feed rates and cylinder oil formulation
changes. 2 Parts MHC- 4000 Series Sensors The MHC 4000 Series Sensors
from Parker Kittiwake's Holroyd range are a development in smart AE
sensors for fixed installations and incorporating proven MHC technology.
3 Parts Conveyor Belt Ash Instrument Analyser - Ash Eye Series The
Parker Ash Eye is a coal quality monitoring system that attaches to
conveyor belts to monitor the coal as it is moved from the mine to the
stockpile or conveyor transportation, providing real time results of
coal quality to the customer. 1 Part Fixed Laboratory Ash Instrument
Analyser - Lab Ash Series The Parker Lab Ash is a laboratory instrument
providing a quick measurement of the ash content of a crushed sample of
coal. It is easy to use and provides accurate results within a few
minutes. 
Tidak ada komentar:
Posting Komentar